Call Us Today (949) 510-7249
Cart 0

Monitors

High Definition Monitors

Rear viewing LCDs in your camera and camcorders are sometime adequate to monitor your shoots, however using an external monitor closer to where you are operating is simply a better solution. Our cranes and SteadyTrackers support external monitors. When your camera is 4 meters in the air, or tilted looking straight down, or panned 90 degrees right, having an external monitor allows you to stay in control at the shot progresses.

We offer both 7 and 10 inch High definition monitoring solutions depending on the work that you are doing. High definition monitors support framing, but additionally provide a much clearer detail and in most cases the ability to focus the camera via the high def monitor. In conjunction with a focus controller, such as our LNC50, you are able to adjust the focus remotely.

7" and 10" High definition monitor w HDMI and Component HD input

16:9 / 4:3 Selectable TFT LCD Monitors. Ideal for high definition video and DSLR filmmaking applications, these monitors allow the operator to monitor, frame, and focus, allowing a wide variety of functions to be done remotely, while your camera is all the way over there. Easily switchable from 16:9 to 4:3 aspect ratios. Our high definition monitors accept both an HDMI signal as well as component video, allowing you to see rich, deep high definition. The monitors are capable of displaying 720p, 1080i, and 1080p signals, so what you put in, you get out. Adding a high definition monitor will really make using the CobraCranes or SteadyTrackers easier on the eyes, better for keeping subjects in frame and give you the ability to focus remotely - even when you can’t see the camera. These monitors benefit from the HDMI output port of virtually all DSLR video capable cameras.

Screen Size 7" Diagonal 16:9 AR 10" Diagonal 16:9 AR
Display Type TFT LCD Panel TFT LCD Panel
Active Area 6.12" (W) x 3.45" (H) 9" (W) x 5.45" (H)
Resolution 800x480 up to 1920x1080 1024x600 up to 1920x1080
Video System NTSC & PAL Standards Compatible (Auto detect) NTSC & PAL Standards Compatible (Auto detect)
Aspect Ratio 16:9 & 4:3 Selectable 16:9 & 4:3 Selectable
Viewing Angle (120° horizontal x 140° vertical) (140° horizontal x 110° vertical)
Power Supply 12v DC 12v DC
Battery 2200mAh/7.4v (built-in) 2200mAh/7.4v (built-in)
Current 650mA (1.2A when charging) 500mA (1.2A when charging)
Video Input/Output HDMI, YPbPr, AV HDMI, YPbPr, AV
Mount Type Bottom & Rear Mount Bracket Bottom & Rear Mount Bracket
Brightness 450cd/mSQ 250cd/mSQ
Power Consumption Low Power Consumption - 12 volts Input, 8W Max Low Power Consumption - 12 volts Input, 6W Max
Operating Conditions 32° -140° F, 85% Max Humidity 32° -140° F, 85% Max Humidity
Weight 550 grams 1144 grams
Dimensions 188mm (W) x 125mm (H) x 33mm (D) 259mm (W) x 170mm (H) x 36.5mm (D)
Buy Now CC-7HDMON $299 CC-10HDMON $399

Ideal for high definition video and DSLR filmmaking applications, these monitors allow the operator to monitor, frame, and focus, allowing a wide variety of functions to be done remotely, while your camera is all the way over there. Easily switchable from 16:9 to 4:3 aspect ratios. Our high definition monitors accept both an HDMI signal as well as component video, allowing you to see rich, deep high definition. The monitors are capable of displaying 720p, 1080i, and 1080p signals, so what you put in, you get out. Adding a high definition monitor will really make using the CobraCranes or SteadyTrackers easier on the eyes, better for keeping subjects in frame and give you the ability to focus remotely - even when you can't see the camera. 

Compatible with most Digital SLR and HD DV Cameras

1 HDMI Cable Allows you to connect to a HDMI video source.
1 Standalone Bracket Can mount unit of almost any flat surface
1 Remote Control Wirelessly control the monitors functions.
1 AC Adapter 12 volt AC adapter allows you to power the monitor from any outlet.
1 Operation Manual